Crucial roles of soil inherent Fe-bearing minerals in enhanced Cr(VI) reduction by biochar: The electronegativity neutralization and electron transfer mediation.

Biochar has been used for soil Cr(VI) remediation in the last decade due to its enriched redox functional groups and good electrochemical properties. However, the role of soil inherent Fe-bearing minerals during the reduction of Cr(VI) has been largely overlooked. In this study, biochar with different electron-donating capacities (EDCs) was produced at 400 °C (BC400) and 700 °C (BC700), and their performance for Cr(VI) reduction in soils with varied properties (e.g., Fe content) was investigated. The addition of BC400 caused around 14.2-36.0 mg g-1 Cr(VI) reduction after two weeks of incubation in red soil, paddy soil, loess soil, and fluvo-aquic soil, while a less Cr(VI) was reduced by BC700 (2.57-16.7 mg g-1) with smaller EDCs. The Cr(VI) reduction by both biochars in different soils was closely related to Fe content (R2 = 0.93-0.98), so red soil with the richest Fe (14.8% > 1.79-3.49%) showed the best reduction capability, and the removal of soil free Fe oxides (e.g., hematite) resulted in 71.9% decrease of Cr(VI) reduction by BC400. On one hand, Fe-bearing minerals could increase the soil acidity, neutralize the surface negative charge of biochar, enhance the contact between Cr(VI) and biochar, and thus facilitate the direct Cr(VI) reduction by biochar in soils. On the other hand, Fe-bearing minerals could also facilitate the indirect Cr(VI) reduction by mediating the electron from biochar to Cr(VI) with the cyclic transformation of Fe(II)/Fe(III). This study demonstrates the key role of soil Fe-bearing minerals in Cr(VI) reduction by biochar, which advances our understanding on the biochar-based remediation mechanism of Cr(VI)-contaminated soils.

Theoretical insights into excited state behaviors of D3HF derivatives via altering atomic electronegativity of chalcogen.

Inspired by the distinguished photochemical characteristics of new organic molecule containing the chalcogenide substitution that could be potentially applied across various disciplines, in this work, the effects of atomic electronegativity of chalcogen (O, S and Se) on hydrogen bond interactions and proton transfer (PT) reaction. We present the characteristic 2,8-diphenyl-3,7-dihydroxy-4H,6H-pyrano[3,2-g]-chromene-4,6-dione (D3HF), which is based on 3-hydroxyflavone (3HF) and contains intramolecular double hydrogen bonds that is the main objective of this study to explore in detail the influence of the change of atomic electronegativity on the dual hydrogen bond interaction and the excited state proton transfer (ESPT) behavior by photoexcitation. By comparing the structural changes and infrared (IR) vibrational spectra of the D3HF derivatives (D3HF-O, D3HF-S and D3HF-Se) fluorophores in S0 and S1 states, combined with the preliminary detection of hydrogen bond interaction by core-valence bifurcation (CVB) index, we can conclude that the hydrogen bond is strengthened in S1 state, which is favorable for the occurrence of ESPT reactions. The charge recombination behavior of hydrogen bond induced by photoexcitation also further illustrates this point. Via constructing potential energy surfaces (PESs) based on restrictive optimization, we finally clarify the excited state single PT mechanism for D3HF derivatives. Specially, we confirm change of atomic electronegativity has a regulatory effect on the ESIPT behavior of D3HF and its derivatives, that is, the lower the atomic electronegativity is more conducive to the ESIPT reaction.

Role of low-density lipoprotein electronegativity and sexual dimorphism in contributing early ventricular tachyarrhythmias following ST-elevation myocardial infarction.

Background: Early ventricular tachycardia/fibrillation (VT/VF) in patients with ST-elevation myocardial infarction (STEMI) has higher morbidity and mortality. This study examines gender-differentiated risk factors and underlying mechanisms for early onset VT/VF in STEMI. Methods: We analyzed data from 2,964 consecutive STEMI patients between January 1, 2008 and December 31, 2021. Early VT/VF was defined as occurrence of spontaneous VT/VF of ≥30 s or requirement of immediate cardioversion/defibrillation within the first 48 h after symptoms. An ex vivo ischemic-reperfusion experiments were conducted in 8-week-old ApoE-/- mice fed a high-fat diet to explore the underlying mechanisms of early VT/VF. Results: In 255 of out 2,964 STEMI patients who experienced early VT/VF, the age was younger (58.6 ± 13.8 vs. 61.0 ± 13.0 years old, P = 0.008) with a male predominance. The plasma levels of L5, the most electronegative subclass of low-density lipoprotein, was higher in early VT/VF patients compared to those without early VT/VF (n = 21, L5: 14.1 ± 22.6% vs. n = 46, L5: 4.3 ± 9.9%, P = 0.016). In the experimental setup, all male mice (n = 4) developed VT/VF post sham operation, whereas no such incidence was observed in the female mice (n = 3). Significantly, male mice exhibited considerably slower cardiac conduction velocity as compared to their female counterparts in whole heart preparations (25.01 ± 0.93 cm/s vs.42.32 ± 5.70 cm/s, P < 0.001), despite analogous action potential durations. Furthermore, isolated ventricular myocytes from male mice showed a distinctly lower sodium current density (-29.20 ± 3.04 pA/pF, n = 6) in comparison to female mice (-114.05 ± 6.41 pA/pF, n = 6, P < 0.001). This decreased sodium current density was paralleled by a reduced membrane expression of Nav1.5 protein (0.38 ± 0.06 vs. 0.89 ± 0.09 A.U., P < 0.001) and increased cytosolic Nav1.5 levels (0.59 ± 0.06 vs. 0.29 ± 0.04 A.U., P = 0.001) in male mice. Furthermore, it was observed that the overall expressions of sorting nexin 27 (SNX27) and vacuolar protein sorting 26 (VPS26) were significantly diminished in male mice as compared to female littermates (0.91 ± 0.15 vs. 1.70 ± 0.28, P = 0.02 and 0.74 ± 0.09 vs. 1.57 ± 0.13, P < 0.01, respectively). Conclusions: Our findings reveal that male STEMI patients with early VT/VF are associated with elevated L5 levels. The gender-based discrepancy in early VT/VF predisposition might be due to compromised sodium channel trafficking, possibly linked with increased LDL electronegativity.

Theoretical investigation on regulating photophysical properties and proton transfer behavior by electronegativity for near-infrared emitting styryl dyes.

Our main focus is to explore the atomic electronegativity-dependent photoinduced behavior of styryl derivatives (HBO, HBS, and HBSe). The results of structural parameter calculation by the DFT method show that the intramolecular hydrogen bonds of normal and tautomer form are strengthened and weakened, respectively, in an excited state (S1), which is conducive to the excited intramolecular proton transfer (ESIPT) process. The enhancement of excited hydrogen bond is beneficial to the ESIPT process from the aspects of infrared vibration frequency (IR), Mulliken's charge analysis, and density gradient reduction (RDG). Additionally, by determining the bond energy with the band critical point (BCP) parameter, we found that the lower the electronegativity of the atom, the larger the hydrogen bond strength at the excited state and the more likely ESIPT reaction occurs. Meanwhile, the intramolecular H-bonds O-H…N in HBO, HBS, and HBSe are enhanced with the weakened electron-withdrawing capacity of the atom (from O to S and Se). Subsequently, frontier molecular orbital (FMOs) and charge density difference (CDD) analyses essentially revealed that electron redistribution induces the ESIPT process. Low atomic electronegativity exhibits the high chemical activity of the excited state. Furthermore, to demonstrate the electronegativity-dependent ESIPT behavior of the system, we built potential energy curves (PECs) and located the transition states (TS) of proton transfer processes.

Stabilizing Highly Active Ru Sites by Electron Reservoir in Acidic Oxygen Evolution.

Proton exchange membrane water electrolysis is hindered by the sluggish kinetics of the anodic oxygen evolution reaction. RuO2 is regarded as a promising alternative to IrO2 for the anode catalyst of proton exchange membrane water electrolyzers due to its superior activity and relatively lower cost compared to IrO2. However, the dissolution of Ru induced by its overoxidation under acidic oxygen evolution reaction (OER) conditions greatly hinders its durability. Herein, we developed a strategy for stabilizing RuO2 in acidic OER by the incorporation of high-valence metals with suitable ionic electronegativity. A molten salt method was employed to synthesize a series of high-valence metal-substituted RuO2 with large specific surface areas. The experimental results revealed that a high content of surface Ru4+ species promoted the OER intrinsic activity of high-valence doped RuO2. It was found that there was a linear relationship between the ratio of surface Ru4+/Ru3+ species and the ionic electronegativity of the dopant metals. By regulating the ratio of surface Ru4+/Ru3+ species, incorporating Re, with the highest ionic electronegativity, endowed Re0.1Ru0.9O2 with exceptional OER activity, exhibiting a low overpotential of 199 mV to reach 10 mA cm-2. More importantly, Re0.1Ru0.9O2 demonstrated outstanding stability at both 10 mA cm-2 (over 300 h) and 100 mA cm-2 (over 25 h). The characterization of post-stability Re0.1Ru0.9O2 revealed that Re promoted electron transfer to Ru, serving as an electron reservoir to mitigate excessive oxidation of Ru sites during the OER process and thus enhancing OER stability. We conclude that Re, with the highest ionic electronegativity, attracted a mass of electrons from Ru in the pre-catalyst and replenished electrons to Ru under the operating potential. This work spotlights an effective strategy for stabilizing cost-effective Ru-based catalysts for acidic OER.

The impact of support electronegativity on the electrochemical properties of platinum.

Modulating the electronic structure of platinum (Pt) through a support is an important strategy for enhancing its electrocatalytic properties. In this work, to explore the impact of support electronegativity on Pt's catalytic activity for hydrogen evolution, we chose diverse metals with varying electronegativities that are stable in acidic solutions, such as titanium (Ti), molybdenum (Mo), and tungsten (W), as supports. Ti is the optimal support according to density functional theory (DFT) calculations. As expected, the Pt@Ti catalyst demonstrated remarkable efficiency in the hydrogen evolution reaction (HER), displaying a minimal overpotential of 13 mV at -10 mA cm-2, a Tafel slope of 34.5 mV dec-1, and sustained durability over 110 h in a 0.5 M H2SO4 solution. To unravel the metal-support interaction (MSI) between Pt and Ti, a comprehensive exploration encompassing both experimental investigations and DFT calculations was undertaken. The results elucidate that the outstanding HER performance of Pt@Ti stems from robust synergies forged between Pt and Ti atoms within the Ti support. This work not only furnishes a technique for producing electrocatalysts with superior efficiency and stability but also streamlines the process of choosing the most appropriate metal support. Moreover, it enhances comprehension of the interaction between Pt and the metal support.

Low-Electronegativity Cationic High-Entropy Doping to Trigger Stable Anion Redox Activity for High-Ni Co-Free Layered Cathodes in Li-Ion Batteries.

LiNi0.8 Co0.1 Mn0.1 O2 (NCM-811) exhibits the highest capacity in commercial lithium-ion batteries (LIBs), and the high Ni content (80 %) provides the only route for high energy density. However, the cationic structure instability arisen from the increase of Ni content (>80 %) limits the further increase of the capacity, and inevitable O2 release related to anionic structure instability hinders the utilization of anion redox activity. Here, by comparing various combinations of high-entropy dopants substituted Co element, we propose a low-electronegativity cationic high-entropy doping strategy to fabricate the high-Ni Co-free layered cathode (LiNi0.8 Mn0.12 Al0.02 Ti0.02 Cr0.02 Fe0.02 O2 ) that exhibits much higher capacity and cycling stability. Configurational disorder originated from cationic high-entropy doping in transition metal (TM) layer, anchors the oxidized lattice oxygen ((O2 )n- ) to preserve high (O2 )n- content, triggering the anion redox activity. Electron transfer induced by applying TM dopants with lower electronegativity than that of Co element, increases the electron density of O in TM-O octahedron (TM-O6 ) configuration to reach higher (O2 )n- content, resulting in the higher anion redox activity. With exploring the stabilization effect on both cations and anions of high-entropy doping and low-electronegativity cationic modified anion redox activity, we propose an innovative and variable pathway for rationally tuning the properties of commercial cathodes.

Tailoring MXene Thickness and Functionalization for Enhanced Room-Temperature Trace NO2 Sensing.

In this study, precise control over the thickness and termination of Ti3C2TX MXene flakes is achieved to enhance their electrical properties, environmental stability, and gas-sensing performance. Utilizing a hybrid method involving high-pressure processing, stirring, and immiscible solutions, sub-100 nm MXene flake thickness is achieved within the MXene film on the Si-wafer. Functionalization control is achieved by defunctionalizing MXene at 650 °C under vacuum and H2 gas in a CVD furnace, followed by refunctionalization with iodine and bromine vaporization from a bubbler attached to the CVD. Notably, the introduction of iodine, which has a larger atomic size, lower electronegativity, reduce shielding effect, and lower hydrophilicity (contact angle: 99°), profoundly affecting MXene. It improves the surface area (36.2 cm2 g-1), oxidation stability in aqueous/ambient environments (21 days/80 days), and film conductivity (749 S m-1). Additionally, it significantly enhances the gas-sensing performance, including the sensitivity (0.1119 Ω ppm-1), response (0.2% and 23% to 50 ppb and 200 ppm NO2), and response/recovery times (90/100 s). The reduced shielding effect of the -I-terminals and the metallic characteristics of MXene enhance the selectivity of I-MXene toward NO2. This approach paves the way for the development of stable and high-performance gas-sensing two-dimensional materials with promising prospects for future studies.

Effects of Chalcogen Atoms on Excited-State Double-Proton Transfer Behavior for 3,6-bis(4,5-Dihydroxyoxazo-2-yl)benzene-1,2-diol Derivatives: A Computational Investigation.

The impact of the chalcogen atomic electronegativity (O, S, and Se atoms) of new organic molecules on excited-state dynamical reactions is self-evident. Inspired by this kind of distinguished photochemical characteristic, in this work, we performed a computational investigation of chalcogen-substituted 3,6-bis(4,5-dihydroxyoxazo-2-yl)benzene-1,2-diol (BDYBD) derivatives (i.e., BDYBD-O, BDYBD-S, and BDYBD-Se). In this paper, we pay close attention to characteristic BDYBD derivatives that contain intramolecular double hydrogen bonds (O1-H2···N3 and O4-H5···N6). The main goal of this study was to explore how changes in atomic electronegativity affect the way hydrogen bonds interact and how excited molecules affect transfer protons. We go into further detail in the main text of the paper. By fixing our attention to geometrical variations and infrared (IR) vibrational spectra between the S0 and S1 states, exploring hydrogen bonding behaviors using the core-valence bifurcation (CVB) index, and simulating hydrogen bonding energy (EHB) via the atom in molecule (AIM) method, we clarified the photo-induced strengthened dual hydrogen bonding interactions that facilitate the excited-state dual-proton transfer (ESDPT) behavior of BDYBD derivatives. The reorganization of charge stemming from photoexcitation further verifies the tendencies of ESDPT reactions. We relied on constructing potential energy surfaces (PESs) by adopting a restrictive optimization approach, and herein, we finally clarify the gradual ESDPT mechanism of BDYBD derivatives. Particularly, we confirm that the variation in chalcogen atomic electronegativity has a regulatory effect on the ESDPT behavior of BDYBD derivatives; that is, the lower the atomic electronegativity, the more favorable it is for the gradual ESDPT reaction.

Low-Electronegativity Mn-Contraction of PtMn Nanodendrites Boosts Oxygen Reduction Durability.

Platinum metal (PtM, M=Ni, Fe, Co) alloys catalysts show high oxygen reduction reaction (ORR) activity due to their well-known strain and ligand effects. However, these PtM alloys usually suffer from a deficient ORR durability in acidic environment as the alloyed metal is prone to be dissolved due to its high electronegativity. Herein, we report a new class of PtMn alloy nanodendrite catalyst with low-electronegativity Mn-contraction for boosting the oxygen reduction durability of fuel cells. The moderate strain in PtMn, induced by Mn contraction, yields optimal oxygen reduction activity at 0.53 A mg-1 at 0.9 V versus reversible hydrogen electrode (RHE). Most importantly, we show that relative to well-known high-electronegativity Ni-based Pt alloy counterpart, the PtMn nanodendrite catalyst experiences less transition metals' dissolution in acidic solution and achieves an outstanding mass activity retention of 96 % after 10,000 degradation cycles. Density functional theory calculation reveals that PtMn alloys are thermodynamically more stable than PtNi alloys in terms of formation enthalpy and cohesive energy. The PtMn nanodendrite-based membrane electrode assembly delivers an outstanding peak power density of 1.36 W cm-2 at a low Pt loading and high-performance retention over 50 h operations at 0.6 V in H2 -O2 hydrogen fuel cells.

More Electropositive is More Electronegative: Atom Size Determines C=X Group Electronegativity.

Opposite to what one might expect, we find that the C=X group can become effectively more, not less, electronegative when the Pauling electronegativity of atom X decreases down Groups 16, 15, and 14 of the Periodic Table. Our quantum-chemical analyses, show that, and why, this phenomenon is a direct consequence of the increasing size of atom X down a group. These findings can be applied to tuning and improving the hydrogen-bond donor strength of amides H2 NC(=X)R by increasingly withdrawing density from the NH2 group. A striking example is that H2 NC(=SiR2 )R is a stronger hydrogen-bond donor than H2 NC(=CR2 )R.

Adjusting the Electron-Withdrawing Ability of Acceptors in Thermally Activated Delayed Fluorescence Conjugated Polymers for High-Performance OLEDs.

Constructing high-performance solution-processed organic light-emitting diodes (OLEDs) based on thermally activated delayed fluorescence (TADF) conjugated polymers remains a challenging issue. The electron-withdrawing ability of acceptors in TADF units significantly affects the TADF properties of the conjugated polymers. Herein, we have designed three TADF conjugated polymers, in which phenoxazine donors and anthracen-9(10H)-one acceptors are incorporated into the polymeric backbones and side chains, respectively, and the carbazole derivative is copolymerized as the host. By incorporating different heteroatoms, such as nitrogen, oxygen, or sulfur, with slightly different electronegativities into anthracen-9(10H)-one, the effect of the electron-withdrawing ability of the acceptor on the performance of conjugated TADF polymer-based OLEDs is thus systematically studied. It is found that the introduction of a nitrogen atom can enhance the spin-orbital coupling and RISC process due to the modulated energy levels and nature of the excited states. As a result, the solution-processed OLEDs based on the prepared polymer p-PXZ-XN display an excellent comprehensive performance with an EQEmax of 17.6%, a low turn-on voltage of 2.8 V, and a maximum brightness of 14750 cd m-2. Notably, the efficiency roll-off is quite low, maintaining 15.1% at 1000 cd m-2, 12.1% at 3000 cd m-2, and 6.1% at 10000 cd m-2, which ranks in the first tier among the reported TADF conjugated polymers. This work provides a guideline for constructing high-efficiency TADF polymers.

Ternary Rare Earth Alloy Pt3-xIrxSc Nanoparticles Modulate Negatively Charged Pt via Charge Transfer To Facilitate pH-Universal Hydrogen Evolution.

Rare earth (RE) elements possess electronic configurations that can provide additional pathways for tailoring the electronic structures of active elements through alloying, making it an important area of exploration in electrocatalysis. However, the large negative redox potential between RE and Pt has hindered the development of RE nanoalloys. In this study, a solid-phase synthesis strategy was employed to synthesize ternary Pt3-xIrxSc nanoparticles (NPs). By leveraging the electronegativity difference between Pt (2.28), Ir (2.20), and Sc (1.36), a charge-balance strategy was implemented to stabilize and enhance the catalytic performance of the alloy. The electron transfer from Sc to Pt/Ir results in the latter being negatively charged, and the Ir modifies the electron density of Pt, enabling favorable adsorption of active H species during the hydrogen evolution reaction (HER). Pt2IrSc exhibits enhanced HER activity at all pH values, achieving low overpotentials at 10 mA cm-2 of only 13, 18, and 25 mV in 0.5 M H2SO4, 1 M PBS, and 1 M KOH, respectively. This electrocatalyst also exhibits robust electrocatalytic stability even after 20,000 cycles. This work represents an application of the charge balance strategy to RE nanoalloys, and it is expected to inspire the design and synthesis of highly reactive RE nanoalloys.

Atomic electronegativity-dependent intramolecular hydrogen bond and fluorescence characteristics of novel scaffold-based fluorophore: a TD-DFT study.

In this work, fluorescent properties and excited-state intramolecular proton transfer (ESIPT) processes of 2,5-bis(benzo[d]thiazol-2-yl)phenol (BTP) and its derivatives (BOP and BSeP) with different heteroatom atoms (O and Se) have been systematically explored by the density functional theory (DFT) and time-dependent DFT (TD-DFT) methods. The calculated absorption and fluorescence emission peaks agree well with the experimental values in acetonitrile. From the data of structures, topological parameters, reduced density gradient analyses, and infrared (IR) vibrational frequencies, the intramolecular hydrogen bonds (IHBs) of BTP and its derivatives are enhanced upon light-excitation. The potential energy curves show that the ESIPT process occurs in BTP and its derivatives after surmounting 0.167-0.306 eV energy barrier. The strength of intramolecular hydrogen bond, HOMO-LUMO energy gap, and red-shifted value of absorption and fluorescence emission wavelengths are dependent on the electron-withdrawing ability of heteroatom from O to S and Se. We believe that this work can pave the way for developing a new ESIPT-based fluorophore with better luminescent properties.

High-Throughput Screening of High-Performance Thermoelectric Materials with Gibbs Free Energy and Electronegativity.

Thermoelectric (TE) materials are an important class of energy materials that can directly convert thermal energy into electrical energy. Screening high-performance thermoelectric materials and improving their TE properties are important goals of TE materials research. Based on the objective relationship among the molar Gibbs free energy (Gm), the chemical potential, the Fermi level, the electronegativity (X) and the TE property of a material, a new method for screening TE materials with high throughput is proposed. This method requires no experiments and no first principle or Ab initio calculation. It only needs to find or calculate the molar Gibbs free energy and electronegativity of the material. Here, by calculating a variety of typical and atypical TE materials, it is found that the molar Gibbs free energy of Bi2Te3 and Sb2Te3 from 298 to 600 K (Gm = -130.20~-248.82 kJ/mol) and the electronegativity of Bi2Te3 and Sb2Te3 and PbTe (X = 1.80~2.21) can be used as criteria to judge the potential of materials to become high-performance TE materials. For good TE compounds, Gm and X are required to meet the corresponding standards at the same time. By taking Gm = -130.20~-248.82 kJ/mol and X = 1.80~2.21 as screening criteria for high performance TE materials, it is found that the Gm and X of all 15 typical TE materials and 9 widely studied TE materials meet the requirement very well, except for the X of Mg2Si, and 64 pure substances are screened as potential TE materials from 102 atypical TE materials. In addition, with reference to their electronegativity, 44 pure substances are selected directly from a thermochemical data book as potential high-performance TE materials. A particular finding is that several carbides, such as Be2C, CaC2, BaC2, SmC2, TaC and NbC, may have certain TE properties. Because the Gm and X of pure substances can be easily found in thermochemical data books and calculated using the X of pure elements, respectively, the Gm and X of materials can be used as good high-throughput screening criteria for predicting TE properties.

Computational Insights into Excited State Intramolecular Double Proton Transfer Behavior Associated with Atomic Electronegativity for Bis(2'-benzothiazolyl)hydroquinone.

Inspired by the distinguished regulated photochemical and photophysical properties of 2-(2'-hydroxyphenyl)benzazole derivatives, in this work, the novel bis(2'-benzothiazolyl)hydroquinone (BBTHQ) fluorophore is explored, looking at its photo-induced behaviors associated with different substituted atomic electronegativities, i.e., BBTHQ-SO, BBTHQ-SS and BBTHQ-Se compounds. From the structural changes, infrared (IR) vibrational variations and simulated core-valence bifurcation (CVB) indexes for the dual hydrogen bonds for the three BBTHQ derivatives, we see that low atomic electronegativity could be conducive to enhancing hydrogen bonding effects in the S1 state. Particularly, the O4-H5⋯N6 of BBTHQ-SO and the O1-H2⋯N3 of BBTHQ-SSe could be strengthened to be more intensive in the S1 state, respectively. Looking into the charge recombination induced by photoexcitation, we confirm a favorable ESDPT trend deriving from the charge reorganization of the dual hydrogen bonding regions. By constructing the potential energy surfaces (PESs) along with the ESDPT paths for the BBTHQ-SO, BBTHQ-SS and BBTHQ-Se compounds, we not only unveil stepwise ESDPT behaviors, but also present an atomic electronegativity-regulated ESDPT mechanism.

A computational study of CuCrX2 (X = S, Se, Te) for intermediate band solar cell: Conceptual density functional theory approach.

Transition metals doped semiconductors have been extensively used as a greener alternative to lead-based solar cell materials. In this work, we have investigated the structure, electronic, optical, and thermo-chemical properties of CuCrX2 (X = S, Se, Te) by using the Conceptual Density Functional Theory (CDFT) approach. Different suitable exchange correlations have been used for the process of geometry optimization of systems in the study. Applied exchange correlations namely B3LYP and WB97XD demonstrate that the energy gap shows a decline from the atom S to Se to Te. HOMO-LUMO obtained from level B3LYP/LANL2DZ is in accordance with the stated data. The attained band gap directs that studied materials could be beneficial for further utilization in optoelectronic and photovoltaic devices. A comparative study has been made based on the selected exchange correlations for the analysis of investigated materials, which has not been explored commonly. The study reveals that B3LYP/LANL2DZ could be a better choice for a combination set of level and basis set for studying these types of compounds. CDFT-based global reactivity descriptors are computed and analyzed. The obtained band gap range indicates the desirable nature of CuCrX2 for further exploration in the application of Intermediate Band Solar cells.

Acid-Base Properties of Oxides Derived from Oxide Melt Solution Calorimetry.

The paper analyzes the relationships among acid-base interactions in various oxide systems and their thermodynamics. Extensive data on enthalpies of solution of binary oxides in oxide melts of several compositions, obtained by high-temperature oxide melt solution calorimetry at 700 and 800 °C, are systematized and analyzed. Oxides with low electronegativity, namely the alkali and alkaline earth oxides, which are strong oxide ion donors, show enthalpies of solution that have negative values greater than -100 kJ per mole of oxide ion. Their enthalpies of solution become more negative with decreasing electronegativity in the order Li, Na, K and Mg, Ca, Sr, Ba in both of the commonly used molten oxide calorimetric solvents: sodium molybdate and lead borate. Oxides with high electronegativity, including P2O5, SiO2, GeO2, and other acidic oxides, dissolve more exothermically in the less acidic solvent (lead borate). The remaining oxides, with intermediate electronegativity (amphoteric oxides) have enthalpies of solution of between +50 and -100 kJ/mol, with many close to zero. More limited data for the enthalpies of solution of oxides in multicomponent aluminosilicate melts at higher temperature are also discussed. Overall, the ionic model combined with the Lux-Flood description of acid-base reactions provide a consistent and useful interpretation of the data and their application for understanding the thermodynamic stability of ternary oxide systems in solid and liquid states.

Synergistically Tuning Surface States of Hierarchical MoC by Pt-N Dual-Doping Engineering for Optimizing Hydrogen Evolution Activity.

Catalytic performance can be greatly enhanced by rational modulation of the surface state. In this study, reasonable adjustment of the surface states around the Fermi level (EF ) of molybdenum carbide (MoC) (α phase) via a Pt-N dual-doping process to fabricate an electrocatalyst named as Pt-N-MoC is performed to promote hydrogen evolution reaction (HER) performance over the MoC surface. Systematically experimental and theoretical analyses demonstrate that the synergistic tuning of Pt and N can cause the delocalization of surface states, with an increase in the density of surface states near the EF . This is beneficial for accumulating and transferring electrons between the catalyst surface and adsorbent, resulting in a positively linear correlation between the density of surface states near the EF and the HER activity. Moreover, the catalytic performance is further enhanced by artificially fabricating a Pt-N-MoC catalyst that has a unique hierarchical structure composed of MoC nanoparticles (0D), nanosheets (2D), and microrods (3D). As expected, the obtained Pt-N-MoC electrocatalyst exhibits superb HER activity with an extremely low overpotential of 39 mV@10 mA cm-2 as well as superb stability (over 24 d) in an alkaline solution. This work highlights a novel strategy to develop efficient electrocatalysts via adjusting their surface states.

Series of Halogen Engineered Ni(OH)2 Nanosheet for Pseudocapacitive Energy Storage with High Energy Density.

Ni(OH)2 nanosheet, acting as a potential active material for supercapacitors, commonly suffers from sluggish reaction kinetics and low intrinsic conductivity, which results in suboptimal energy density and long cycle life. Herein, a convenient electrochemical halogen functionalization strategy is applied for the preparation of mono/bihalogen engineered Ni(OH)2 electrode materials. The theoretical calculations and experimental results found that thanks to the extraordinarily high electronegativity, optimal reversibility, electronic conductivity, and reaction kinetics could be achieved through F functionalization . However, benefiting from the largest ionic radius, INi(OH)2 contributes the best specific capacity and morphology transformation, which is a new finding that distinguishes it from previous reports in the literature. The exploration of the interaction effect of halogens (F, INi(OH)2 , F, BrNi(OH)2 , and Cl, INi(OH)2 ) manifests that F, INi(OH)2 delivers a higher specific capacity of 200.6 mAh g-1 and an excellent rate capability of 58.2% due to the weaker electrostatic repulsion, abundant defect structure, and large layer spacing. Moreover, the F, INi(OH)2 //FeOOH@NrGO device achieves a high energy density of 97.4 Wh kg-1 and an extremely high power density of 32426.7 W kg-1 , as well as good cycling stability. This work develops a pioneering tactic for designing energy storage materials to meet various demands.